+7 812 200 42 20
Вход Регистрация

Flexographic Printing Machine for Adhesive Tape FLX-03

Flexographic Printing Machine for Adhesive Tape
FLX-03
INQUIRY
TEST
<
label flexo printing machine
PHOTOS
APPLICATION
VIDEO
Semi-automatic C.l. flexographic machine for 3 colors print on adhesive tape, slitting and rewinding with preset width and length Capable to print on: PVC/BOPP adhesive tape. Corona discharge block CR1- 200 is embedded in body frame of the machine.
The machine operates with three printing stations, two additional stations for priming/release and slitting system.
Planetary-type printing station is one of the main units of FLX-03. It consists of chrome-plated central impression drum, three flexographic rolls for type-plate gluing, anilox rolls to transfer paint to type-piate, trays for paint.
Products
fgm_01
fgm_02
fgm_03
Materials
* We make nonstandard core IDs upon request
* We make nonstandard core IDs upon request
Functions and options
FIRE EXTINGUISHING SYSTEM
AUTOMATIC FIRE EXTINGUISHING SYSTEM (AFES)
The AFES is installed in varnishing, priming and painting sections. It consists of aerosol disseminators and autonomous fire alarm units. In case of fire, a sound signal and a light indicator are switched on. After that, the aerosol disseminator begins to work.
ADVANTAGES:
Timely fire prevention
LONGITUDINAL WEB CUTTING
LONGITUDINAL WEB CUTTING
For longitudinal web cutting, the machine is equipped with a special unit that consists of a number of replaceable spacers separated by blades. The finished roll width is equal to width of the corresponding spacer.
ADVANTAGES:
Extended assortment of finished products
VARIOUS PRINTING LENGTHS
PLATE CYLINDERS FOR VARIOUS PRINTING LENGTHS
A plate cylinder is a replaceable mandrel which holds the printing plate with the Customer’s impression print. Printing length and step in the range between 150 and 400 mm depend on the plate cylinder diameter.
ADVANTAGES:
Extended assortment of finished products
Flexible approach to manufacture in dependence of specific requirements for finished products
VISUAL AND AUDIBLE ALARM
VISUAL AND AUDIBLE ALARM
Visual and audible alarm is used to notify the operator on completion of an operation or occurrence of abnormal conditions.
ADVANTAGES:
Prevention of prolonged equipment shutdowns
JR ENDING MONITORING SYSTEM
JR ENDING MONITORING SYSTEM
The system is used to timely stop rewinding process when minimal amount of the film remains on the JR (minimal outer JR diameter).

This criterion is checked by an optic sensor by means of a special mark. When the sensor detects the critical value, the rewinding process is stopped. After that, the operator can replace the JR and finish rewinding at minimal speed.

This makes it possible to finish the process without rejection of the roll due to improper film length.
ADVANTAGES:
Decrease of rejected roll quantity
Increase of production efficiency
Time savings due to elimination of necessity to rethread the film
AUTOMATIC FIRE EXTINGUISHING SYSTEM (AFES)
The AFES is installed in varnishing, priming and painting sections. It consists of aerosol disseminators and autonomous fire alarm units. In case of fire, a sound signal and a light indicator are switched on. After that, the aerosol disseminator begins to work.
ADVANTAGES:
Timely fire prevention
Specifications / Technical data
COMPRESSED AIR
Air pressure – 5–6 bar
Air consumption – 250 l/min
Speed
Mechanical speed – 200 m/min
ELECTRIC POWER SUPPLY
Power consumption – 14 kWh
Supply voltage – 380 V, 50 Hz
COMPRESSED AIR
Air pressure – 72.5–87 psi
Air consumption – 2.8 cu ft/min
Speed
Mechanical speed is – 656 ft/min
ELECTRIC POWER SUPPLY
Power consumption – 14 kWh
Supply voltage – 380 V, 50 Hz